Archives

Woodturning / Woodworking — 2 Comments
13
Apr 20

Busy day

Well, I’ve never clamped anything to this side of the vice before….

I couldn’t move the boxes beneath the bench out of the way because there’s nowhere for them to go, and I didn’t want to spin the piece around because I was using the nailgun and I’m not quite ready to point anything at myself that has the word “gun” in the title just yet. But this worked well enough.

It’s just scraps of pine – that base was actually a board that was in the living room for the last four years and I’d forgotten about it because it was up on top of a bookshelf. Some glue, a few brads and on we go.

Again I didn’t have brads of the right length here so glue and screws provide the holding strength and the brads just pin everything in place long enough for me to get the screws into it. The posts don’t make it up to the top of the edges this time; not all offcuts are long enough. Oh well.

It’s very rough-and-ready and I don’t think it’ll last more than a year at most, but welcome to making do in the Lock-in. It’ll be grand. I slathered it with some BLO so I’ll fill it with compost, coffee grounds, eggshells and plants tomorrow.

Did get a bit of turning in as well today.

I didn’t use the big jaws after all, I wanted to get this piece done quickly so I skipped the experimental bit and just repeated yesterday’s process.

I was a bit more aggressive with the hollowing out this time, with the result that the walls are a bit thinner than the first bowl. And it went pretty well, with almost no catches (and I could recover the one I did get), though I did find myself wondering for a good 20-30 seconds what was wrong with my scraper when cleaning up the bottom of the bowl before I realised I had the sodding thing upside down.

Sigh.

Still, turned out nice.

I like the burn line beneath the rim as well, I only put it in on a whim and it came out well.

It’s only a little thing but it’s grand for use as a salt pig. I like that urn-like shape as well, though the hollowing out with a bowl gouge and a scraper is a bit awkward. I’ve sent away for a few bits and pieces to make up my own carbide scrapers, they might help with that. But for now I’m having fun with this, and I have a few more blanks to get through, as well as an entire green log to break down and make things for Fernhill with. Maybe a bowl would work for that, it could act like a natural birdbath….

Dropped it off with some shopping to Mom&Dad who’re cocooning away at the moment. Who of course immediately picked it up bare-handed, so lots of handwashing all round required. Next time I’ll disinfect it before putting it in a box…

Woodworking — 4 Comments
11
Apr 20

Using up offcuts

So with the lockdown in Ireland now extended to May 5 – or The Lock-in as we ought to be calling it the way WW2 was The Emergency – garden centers are closed (apparently the Greens asking us to feed ourselves from our window boxes full of lettuce didn’t make Woodies an essential business 😀 ). I ran around one before the Lock-in commenced and got a lot of seeds and potting compost (and we already had a general-purpose liquid fertiliser and tomato feed and for high-nitrogen stuff like Basil, well everyone knows that trick of mixing eggshells and used coffee grounds with their compost, right?); but I thought we had more planters than we had. Seems I threw the ones we did have in the bin a few weeks ago because the UV had finally mangled them past maintenance’s hopes. Oh well.

I do have a shiny new brad nailer…

And I also have every woodworker’s inability to throw out wood combined with a large timber storage box 😀

Why yes, those are a lot of bowl blanks, and yes, my first bowl is all finished off and put to work as well, thanks for asking 😀

So I found some of the cedar T&G lengths I had which I have literally no other project in mind for but I still had a single three metre length in the house and three or four metre lengths in the box, so those are obviously the sides, and I can do the ends with some plywood bits and pieces and use some 1×3 scraps of deal to tie them together.

For rapidly knocking something like this out, that brad nailer is a bunch of fun. There’s glue providing the actual long-term strenght but a few 50mm brads act as temporary fixings and clamps all in one.

Then an offcut of poplar which was, to be honest, so scraggly that using it for anything proper would have meant a fair bit of work getting it straightened out, but for something that will live outside and be full of earth, this is grand. It acts as the base, and it was about 3″ too long so those 3″ get cut up into feet.

I didn’t have brads in any size bar 20mm and 50mm so I had nothing that really held the sides in place; the 20mm ones pinned them in position long enough to drive longer screws into the 1×3 battens though. Need to buy a few more lengths.

And that was it really. Very quick and dirty, handsaws and brad nailers and even the pillar drill with a fostner bit for the handles (along with a rasp, some sandpaper, a block plane, and some tidying up with a chisel). But it does the job and kept us at home, so that’s fine by me.

Filled with potting compost mixed with eggshells and coffee grounds, then transplanted our basil plants into it and watered with some liquid fertiliser.

Slightly less ghetto than previous solutions 😀