10
Apr 20

Planting mushrooms

So the mushrooms turned from that branch from Fernhill were finished off; I cut the tenons off the two I turned in the chuck, drilled a mortice and glued in a piece of dowel:

And then Claire, Calum, Sonic and myself wandered up to Fernhill to plant them.

…and then I looted more wood.

Slightly larger this, but less circular. Not sure what I’ll make from it. More mushrooms I think, and maybe I can do a little birdbath…


08
Apr 20

Fixing Mushrooms

So after the last exploding mushroom, I tried turning the last two chunks of log into their mushrooms. And both times, it was looking soooo nice…

And then on almost the last finishing cut with the spindle or bowl gouge on the underneath of the cap, it caught and half the cap snapped right off, hitting me in the faceshield.

Well, maybe I had more hollowing out to do 😀
But I figured since these are going outdoors in the woods for the hedgehogs, maybe I can live with a rustic look, so I experimented by using some titebond to glue the pieces back together…

And after a day to let the glue cure (and no, I couldn’t get clamping so these were just rub joints), I put them back on the lathe at the lowest setting just for sanding and finishing.

And they held! I was rather surprised to be honest…
So up the grits from 120 to 320, then a coat of BLO, a topcoat of button shellac and then a polish with some beeswax under a heat gun, and…

So tomorrow I’ll cut off the tenons, drill a short mortice and glue a few inches of dowel into it and we can go plant these up in Fernhill.

...and maybe grab another log. I was thinking if we made a small bowl that it could be a natural birdbath or hedgehog drinking trough…

Oh, and my new nailgun arrived in the post as well 🙂 It even fits the air line connectors so I don’t have to go chasing round ebay looking for an adapter.

It works! Remind me never to glue my fingers together with this thing.
I can’t quite see it being used for much in the way of fine furniture (not that I make much that you could call fine without squinting till you went blind) but I can see it being useful for making quick things like jigs or very small simple things like small boxes for herb plants and the like.

I mean, being able to do a butt joint like that without trying to hold the two boards together and the nail in position and swinging a hammer – that’s kinda neat. And I do need to knock up a quick jig for my woodturning sharpening setup…