So, after the whole resin-casting-a-mug thing, it’s fair to say that the shed was in need of a cleanup…
![](http://178.63.27.54:8080/statictangents/wp-content/uploads/2019/03/IMG_3719a.jpg)
Turns out, sanding resin will actually leave a bit of residue. Also, the shavings are starting to pile up again…
![](http://178.63.27.54:8080/statictangents/wp-content/uploads/2019/04/IMG_3756a.jpg)
And the bandsaw is getting buried…
![](http://178.63.27.54:8080/statictangents/wp-content/uploads/2019/04/IMG_3759a.jpg)
And the shop vac wasn’t actually vac-ing much either. So I started there, and checked the drum for the vortex separator, but it wasn’t even a tenth full, so I took out the filter from the shop vac…
![](http://178.63.27.54:8080/statictangents/wp-content/uploads/2019/04/IMG_3761a.jpg)
And sure enough, there’s the problem:
![](http://178.63.27.54:8080/statictangents/wp-content/uploads/2019/04/IMG_3762a.jpg)
Totally clogged with fines. So out with a stanley knife, and scrape all the dust off because I don’t have a spare filter right now. Took about five minutes, and it’s definitely not perfect but it’ll hold till I get a new one:
![](http://178.63.27.54:8080/statictangents/wp-content/uploads/2019/04/IMG_3763a.jpg)
Then dustpan and brush to fix the floor:
![](http://178.63.27.54:8080/statictangents/wp-content/uploads/2019/04/IMG_3764a.jpg)
And then wipe down the planes, and dip the handles of all the chisels in a jar of BLO and wipe down the handle and blade (after getting rid of all the surface rust with a scotchbrite pad), and all the marking gauges and so on:
![](http://178.63.27.54:8080/statictangents/wp-content/uploads/2019/04/IMG_3765a.jpg)
And clean up the bandsaw and restack everything and wax the table…
![](http://178.63.27.54:8080/statictangents/wp-content/uploads/2019/04/IMG_3766a.jpg)
Yeah, it’s not exactly tidy, but you try putting a litre in a pint pot sometime.
I mean, this is the After photo:
![](http://178.63.27.54:8080/statictangents/wp-content/uploads/2019/04/IMG_3767a.jpg)
![](http://178.63.27.54:8080/statictangents/wp-content/uploads/2019/04/IMG_3768a.jpg)
Well, now you know why I don’t have a lathe…
Tags: cleaning