Just got back from Quinn’s hardwoods, bought a few boards of walnut, ash and poplar and some t&g cedar for a drawer bottom. Nice chap running it, they have no problem at all with small-order hobbyists like me (and they already get a fair few coming in, especially for school projects and the like). I just wandered in, said hi to the guy running things and told him roughly what I was looking for (1″ thick walnut and 1″ thick poplar), he showed me where their bundles of boards were and left me to myself while I picked out the ones I wanted (and grabbed some ash and some cedar t&g lengths as well), he measured them and totted up the cubic footage and worked out the total and that was that. Very painless and laid back, far less stressful than I thought it’d be (I was expecting to be squeezed in between guys buying five figures worth of wood on all sides and showing up with trucks to haul it away with).
I suppose if I’d picked out everything I wanted to take away, it would have been more painful – on the wallet anyways. Walnut was going for around €75 per cubic foot, poplar was just over €20 and ash just over €30 (I just noted the approximate levels because I figure these vary over time). The boards were pretty good – not all dead straight but no massive cupping or twisting, just some small bowing over 14-16 feet or so which was grand (especially as I had to cut them down to 8 feet to get into the car anyway). Very few knots, no major cracks that I saw and a lot to select from. Way better quality than the softwood in the nice bright DIY stores and damn near cheaper at that (the poplar certainly was).
A few answers to my dumb questions which might be useful for anyone who knew as little as I did walking in the door (since all the “how you buy timber at the yard” questions on the internet seem to be written for the US or UK, and Ireland doesn’t get mentioned):
- The office is in the back of the warehouse from the front loading door. They can take visa so you don’t need to rock up with cash.
- They don’t have a chop saw or power tools on site, bring your own if you need to break down boards to fit in the car (my C4 can get an 8′ board in without doing the overhang and red flag thing, and the boards I was buying were all around 11′ to 14′ so the giant ryoba came in handy again).
- They’re open from 7am and don’t close over lunch, but they’re closed by four on the dot and one on the dot on fridays. But there’s no special time that hobbyists ought to aim for inside of that, it’s pretty random if it’ll be busy or not, and they’re happy to do small sales anyway.
- They don’t have their own delivery service but they’ll arrange delivery for you with an external crowd and just add the cost to the bill if you need it. I’m about 20km away from them and the cost would have been between 30 euro if it’d fit in a hiace, to 50 if it had to go on the van’s roof, to 70 or more if it needed a bigger truck, so it’s about the same amount brooks charged to deliver from 3km away. I really need to figure out a better way to transport this stuff.
Also, if I’d gone there before I started building my bench, I’d probably have grabbed a few lengths of 4″ thick red deal there and just planked the benchtop instead of laminating 2x4s. Next time…
Tags: timber, Woodworking
[…] shorter version of that is, Because Brexit, hardwood now costs 150% or so of what it cost this time last year. Except maybe for that german beech, which I think was roughly the […]